5-Axis CNC Milling
For complex surfaces, angled features and parts that benefit from fewer setups.
AluminumSteelTitanium
Precision Parts · Prototype to Production
Make complex parts
Make complex parts
closer to design intent
A demonstration of 5-axis milling, CNC turning and mill-turn capabilities. Upload a non-confidential drawing to experience a complete buyer-focused RFQ flow.
Sample DFM feedbackSample inspection flowProtected attachments
±0.01 mmIllustrative tolerance, not an actual capability claim
15+Illustrative material groups
3–5 daysIllustrative prototype lead time
100%Illustrative final inspection flow
Capabilities
Check the boundaries before sending an RFQ
The process, size and tolerance figures below only demonstrate content structure. A live website must use customer-approved data.
CNC Turning
For shafts, sleeves, flanges and other rotational components.
Ø3–250 mmSmall batchThreading
Mill-Turn
Complete rotational and off-axis features in fewer setups.
Complex geometryPrototypeProduction
Quality & DFM
Turn “good quality” into verifiable steps
This demo does not display fictional certifications. A live project should only show current certificates the customer owns and authorizes for publication.
Illustrative quality flow
Incoming review, first article, in-process checks, final inspection and shipping records.
| Dimensional inspection | CMM / Vision / Caliper |
| Surface & appearance | Visual standard |
| Records | Inspection report |
| Material traceability | Batch record |
Recommended RFQ inputs
Complete inputs reduce clarification cycles and help engineering assess process risks sooner.
| Drawing revision | 2D + 3D |
| Material condition | Grade / Temper |
| Critical tolerances | CTQ marked |
| Quantity & delivery | Prototype / Batch |
Illustrative Projects
A useful case study is more than a finished-part photo
Each story should cover industry, material, process, challenge and response. These examples are fictional and do not represent customer work.
01
Automation Equipment Bracket
Demo: 6061-T6, 5-axis milling, focused on thin-wall distortion and datum control.
02
Medical Equipment Shaft
Demo: SUS316L, mill-turn, focused on concentricity and surface finishing.
03
Robot End-Effector Flange
Demo: 7075-T6, low-volume production, focused on hole position and reports.
Request for Quotation
Everything needed for a useful quote
Name, company, country, email, process, material, quantity, target delivery, notes and drawings. The system also records the source page, campaign parameters and submission time.
This is a working demo form. Do not upload confidential or production drawings; use a non-sensitive sample file for testing.